Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hello!

With CME 10.0 Jabber for Windows 9.1.0 and above is supported in Softphone Mode. I know what to setup on CME to get J4W running, but I don't know how to train J4W Client that it will register with CME. Do I have to setup something in xml config file or do I have to setup something on onprem Presence server?

Can someone help me out here?

Regards

René

Everyone's tags (6)
16 REPLIES
New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hi Rene,

I  have the same doubt regarding how to set J4W for CME10

Dida you get any info?

regards

New Member

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi islam,

thanks a lot for the link , regarding the stament in document

"The Cisco Jabber for Windows client should register with a presence server such as cloud-based Webex server, or a Cisco Unified Presence server to enable the telephony features on the Jabber client."

      

I don´t haver any presence server.. I think must be " MUST REGISTER..." ,  I guest it wont work without presence server .

regards

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi

Cisco Jabber can support (softphones and Desktop) mode .For CME softphone only supported , other issue for CME conference . Of course if you have prescense , you will get more features. For CME , your jabber will register as phone on your network which cab do calls , this will be ok if you have (iphone , and android mobiles).

Restrictions

The Cisco Jabber for Windows client version should be version 9.1.0 and later version.

The Cisco Jabber for Windows client should register with a presence server such as cloud-based Webex server, or a Cisco Unified Presence server to enable the telephony features on the Jabber client.

The Cisco Jabber for Windows client supports only the visual voice mail functionality using Internet Message Access Protocol (IMAP) on the Cisco Unity Connection.

The Cisco Jabber for Windows client does not support software-based conferencing and supports only the softphone mode with Cisco Unified CME.

Desk phone models are not supported.

Thank you

please rate all useful information

New Member

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

All these information are great, but the big question I have is, what do I have to configure on CUPS Server? And is it possible to get Jabber for Windows connected to CME when my CUPS Server is already configured with TFTP settings which are pointing to CUCM (Unified Configurations Manager = Callmanager)? Cisco Presence Server Version is 8.6.4

Regards

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi Rene

No , this is impossible  to do integration between your CME and your CUPS . There is other solution , but will required new purchase orde , integrate your CME with Cisco unified CallConnections , as the below for more information about Cisco Callconnections:-

http://www.cisco.com/cisco/web/solutions/small_business/products/voice_conferencing/unified_callconnectors/index.html

Thank you

Please rate all useful information

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hello Filiberto

Reply for your request , find the below please:-

The Cisco Jabber for Windows client does not  support software-based conferencing and supports only the softphone mode  with Cisco Unified CME. Kindly be informed that jabber for windows supported starting form CME v10.

Cisco Jabber for Microsoft Windows

Cisco Jabber for Windows client is supported from Cisco Unified CME Release 10 onwards.

Please find the below link :-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Thank you

Please rate all useful information

New Member

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi Islam,

In fact I'm running CME ver 10, I have already followed step by step the configuration but the admin guid did not mention

about how to config jabber for wondows client, the only option are cisco webex and unified presence.

New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hey Filberto

have you tried jabber 9.6.0 i am going to test it with cme

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hi Mohamed,

cisco doc's states that minimun version is 10.. when I tried to config  jabber client is requiered webex or presense server

I don't have any of them,, I could not go further

regards

New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hello,

You need to install Jabber in phone mode. run again the installer with command:

msiexec.exe /i CiscoJabberSetup.msi CLEAR=1
PRODUCT_MODE=Phone_Mode TFTP=1.2.3.4 LANGUAGE=1033 /quiet

Then you should be able to connect.

from:

http://www.cisco.com/en/US/products/ps12511/products_tech_note09186a0080c170ee.shtml#anc5

Regards,

d.

New Member

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi d.jurski

Thanks a lot for the link, I've just tried phone mode and it works !!!!

I registerd jabber windows client in phone mode  with CME ver 10  :-)

I'm trying now with CM server but I have problem to registered ..but I will try again...

thanks once again...  5+++      

New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hello,

You are welcome, for CM make sure you create a phone with type

Cisco Unified Client Services Framework and you assign it to end user, it is working for me. (Device name does not really matter).

If helpfull please rate the post.

Regards,

Daniel

New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Hey Filbert,

I was think of Jabber for windows 9.6.0 that has the options on the link by default. But i cant see to register.

If you dont mind can you please post some config and a screenshot of the jabber setting like tftp:

Did you require presence for this

thanks in advance

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
New Member

Re: Callmanager Express (CME) Version 10.0 and Jabber for Window

Hi Shibly,

This is the config module and I attach the screenshot of jabber's client. I hope this help you

I don't have presence server, with this config is not required.

voice register global

mode  cme

source-address 10.10.10.5 port 5060

max-dn 10

max-pool 10

timezone 9

date-format D/M/Y

hold-alert

file text

create profile sync 0000509530644458

!

voice register dn  1

number 3871

!

voice register pool  1

id device-id-name JabberWIN

type Jabber-Win

number 1 dn 1

username fili2014 password fili2014

description FilJabbWIN

!

!

New Member

Callmanager Express (CME) Version 10.0 and Jabber for Windows

Thanks filbert. its strange i am getting this error when trying to login

The telephony configuration settings invalid

I tried debug voice register events and dont see any request

Please rate the post

Shibly Ibrahim

Please rate the post Shibly Ibrahim
8235
Views
8
Helpful
16
Replies
CreatePlease to create content