Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

callmanager express with pri isdn type 5ess

CAn callmanager express support 5ess call by call? If so, what would have to be coded?

5 REPLIES
Hall of Fame Super Silver

Re: callmanager express with pri isdn type 5ess

Sure it can, 5ESS is an AT&T ISDN switch-type. I am assuming you have a PRI, in order to configure a PRI with CME, do the following:

1. Define the ISDN switch type in the global configuration.

IOS-GWY(config)#isdn switch-type primary-5ess

2. Configure the T1 controller for ISDN PRI signaling.

IOS-GWY(config)#controller t1 1/0

IOS-GWY(config-controller)#framing esf

IOS-GWY(config-controller)#linecode b8zs

IOS-GWY(config-controller)#pri-group timeslots 1-24

3. After configuring the pri-group command, the D channel (interface serial 1/0:23) and the voice port (voice-port 1/0:23) are created automatically by the router.

4. Configure dial-peers

HTH, please rate all posts!

Chris

New Member

Re: callmanager express with pri isdn type 5ess

Chris,

Thanks, that much I've got but does the 5ess require call by call support

Hall of Fame Super Silver

Re: callmanager express with pri isdn type 5ess

Can you elaborate on "call by call support"?

Chris

Hall of Fame Super Gold

Re: callmanager express with pri isdn type 5ess

I think that "call by call" is just a market name for ISDN PRI, nothing else.

Hall of Fame Super Gold

Re: callmanager express with pri isdn type 5ess

Sure, isdn switch-type primary-5ess.

213
Views
0
Helpful
5
Replies
CreatePlease to create content