Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Callmanager Express

Hi all,

Its possible to enable on a ip phone connected to a CME a span to pc port.

Thanks

2 REPLIES
Anonymous
N/A

Re: Callmanager Express

To enable 'Span to PC port' you have to add under telephony-service:

config t

telephony-service

service phone pcPort 1

service phone spanToPCPort 0

create cnf

Bronze

Re: Callmanager Express

One correction, make sure the 'service phone pcPort 1' is actually set to 'service phone pcPort 0' since 1 is disabled and spaning a disabled port is not going to work ...

also check out http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_s1ht.html#wp1108333 for more parameters.

HTH

260
Views
0
Helpful
2
Replies