After this upgrade, when trying to add a new phone, the SIP firmware is loaded, but the right firmware should be SCCP.
Phones that are working ok, are using the FW version SCCP45.9-2-1SR2S. (the same as before upgrade).
After the upgrade Device Defaults configuration was changed to SCCP45.9-0-3S.
I tried to force new phones to use the FW-2-SCCP45.9 1SR2S changing the Phone Load Name but they are still loading the SIP firmware.
Then, I tried to use the FW SCCP45.9-0-3S and they still loading the SIP FW.
You can't change the firmware protocol the phone uses just by hacking the Device Defaults page. The protocol used is configured into the CUCM database for each phone. It could be, that after the upgrade, CUCM didn't copy across your latest firmware images. Have you tried re-installing them onto your TFTP server(s) and restarting the TFTP process ?
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...