Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CallManager RTMT notification

How can I test email notification by RTMT?

As I see, RTMT wants to send mail to email address, but there isn't any result.

I have pasted name of SMTP Mail Server and port number.

I don't know good how Mail server works, can any body help me in this question?


Re: CallManager RTMT notification

There is a known bug filed with cisco regarding this and the Bug ID is CSCeg88885. After insatlled the patch win-K9-MS05-019.EXE suggested in the workaround email alerts were fine.

New Member

Re: CallManager RTMT notification

I am running CallManager 6.0 and have the same issue.


Re: CallManager RTMT notification


You may have solved this one..

If you have configured RTMT with a mail server, and then configured the default alert action to email a specific address...

Easiest thing to do is go to RTMT alert central.

1. Go to the system tab

2. Make sure all the alerts are cleared.

3. Open the Set alert properties for the "AuthenticationFailed" alert

4. Ensure alert is enabled, click next

5. Set the appropriate threshold and alert settings.

6. Open CCMAdmin page

7. Try and login with an incorrect username / password X times (X depends on what you set in your threshold settings)

You should see an alert raised, and if your email is all ok.. you should see an email in your inbox.



New Member

Re: CallManager RTMT notification

I see the alert raised and the so called e-mail recipient but no e-mail.

I have also captured traffic from the server when the alert is supposed to trigger the e-mail, no attempt is made to put the packets for e-mail on the wire.


Re: CallManager RTMT notification

Did anyone get this to work. Our email server is notes and it does not allow for unknown applications to send emails. Is there a way for RTMT to be configured with a sending email address. Or how does anyone else do this



Re: CallManager RTMT notification

Any news?

New Member

Re: CallManager RTMT notification

I had the same problem on CUCM 6.1.2 and solved it with workaround for CSCsf08244 bug.

On CUCM CLI type:

set network dns primary

set network dns secondary

set network domain

Last command "set network domain" restarts CUCM.