Callmanager server Ver4.1.3 hardware upgarde only without software upgrade.
We have CCM cluster with publisher and 8 subscribers. we are planning to upgrade all the servers hardware to H2 platform without change the software version on each box. what is the best procedure to complish this task?
Re: Callmanager server Ver4.1.3 hardware upgarde only without so
If you already have all the new servers, I recommend you to built a copy of your current configuration, just make a BARS backup of each server on your system, then install the same OS version that you are running on the servers including the service release, and finally install the exact CCM version that you are running on the new servers, first publisher and then subscribers including SR, and the restore the BARS backup on the new servers.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...