Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CallManager Station Specific Authorization Code

Dear all gurus,

For Cisco CallMananger, does it have any similar functions as PBX's"station specific authorization code"??

Cheers,

Hunt

5 REPLIES
Cisco Employee

Re: CallManager Station Specific Authorization Code

CUCM has FAC and CMC, not sure if that's what you want

The Features And Services guide available on CCO has all the info on those features

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CallManager Station Specific Authorization Code

Hello Java,

But how to make those features station specific?? As in, how do u restrict the FAC & CMC only work on 1 phone but not other users phones??

Cheers,

Hunt

VIP Super Bronze

Re: CallManager Station Specific Authorization Code

You don't. Any FAC or CMC code is valid on any route pattern that requires it; they are not device-specific.

Please remember to rate helpful responses and identify helpful or
New Member

Re: CallManager Station Specific Authorization Code

Hunt,

You can do this by following Java's recommendation, but here's a little more detail (all on CCO):

Create a new partition

create a new CSS

assign new CSS to station that you want to use FAC on

copy existing route pattern, assign to new PT

This should give yout he desired result, but a little more work is involved

HTH

Emilio

Hall of Fame Super Red

Re: CallManager Station Specific Authorization Code

Hi Hunt,

Just to add a little more to the great info from Java,Jonathan and Emilio

We used to use Station Specific Auth Codes on our Nortel Meridian TDM

system. When we moved to CUCM we realised that this feature was not available.

We have not found this to be a big issue, as Auth Codes are generally used for

Billing restriction purposes. Because Toll calls are billed against the FAC code

when used, the overall functionality has basically remained the same.

Cheers!

Rob

334
Views
0
Helpful
5
Replies