Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CallPickup Ring

Hi

My customers did upgrade from 4.2 to 6.1

The assistant aren't happy with ring after pickup the calls. It's possible remove the ring after press pickup button?

Thanks.

  • IP Telephony
4 REPLIES
Cisco Employee

Re: CallPickup Ring

if you mean you don't want the phones to ring when there is a call in a pickup group just go to the pickup group and disable it

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CallPickup Ring

No.

Call Pickup Notifications I want!

The problem is:

There are 3 phones (A,B,C)

When the C receive a call, the phones A and B receive the notification (it's OK), so when the phone A or B press the pickup button, the call go to telephone (A or B), but before it, there is one ring on the phone. The assistant don't want it. They want pickup the calls without ring before. On the CCM4.2 don't have this problem.

Thanks

New Member

Re: CallPickup Ring

Hi

Nobody noticed the difference of call pickup between CCM4.2 and 6.1? There is one ring before the call be pickup

New Member

Re: CallPickup Ring

Hi

Just disable the auto pickup on Service Parameters/ Cisco CallManager / Auto Pickup Enable = True

191
Views
0
Helpful
4
Replies
This widget could not be displayed.