Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

calls disconnect

Hi Guys,

I have a problem with some calls. When we try to call (PSTN to IPTel) the calls are direclty disconnect (not all some works, and some don't work)

In the SDI traces I have the following:

|3,100,152,1.894691^10.187.38.8^*

17:26:37.065 |<MN::MGCPEndPoint><MV::*@BEGWAYZE.MTSINTRA.NETWORK>|3,100,152,1.894691^*^*

17:26:37.065 |MGCPHandler send msg SUCCESSFULLY to: 10.187.38.8

200 659355451

|3,100,152,1.894691^10.187.38.8^*

17:26:37.093 |MGCPManager remove recent Incoming transId 659355449|3,100,152,1.894689^10.187.38.8^*

17:26:47.764 | |*^*^*

17:26:47.764 |In  Message -- BriSetupMsg -- Protocol= BriProtocol|*^*^*

17:26:47.764 |Ie - BriBearerCapabilityIe -- IEData= 04 03 80 90 A3 |*^*^*

17:26:47.764 |MGCPBhHandler 10.187.38.8 - TCP msg available from Device|3,100,153,1.63740^10.187.38.8^*

17:26:47.764 |MGCPBhHandler - Receiving BhHdr: 0004 0000 0011 8001 0001 0029

|3,100,153,1.63740^10.187.38.8^*

17:26:47.764 |Ie - BriChannelIdIe -- IEData= 18 01 89 |*^*^*

17:26:47.765 |Ie - Q931CallingPartyIe -- IEData= 6C 0B 21 83 34 37 30 38 35 30 33 33 36 |*^*^*

17:26:47.765 |Ie - Q931CalledPartyIe -- IEData= 70 09 A1 32 34 38 31 35 30 35 30 |*^*^*

17:26:47.765 |Ie - Q931HighLayerCompatibilityIe -- IEData= 7D 02 91 81 |*^*^*

17:26:47.765 |MMan_Id= 0. (iep=  0 dsl= 8001 sapi=  0 ces= 0 IpAddr=826bb0a IpPort=2427)|*^*^*

17:26:47.765 |IsdnMsgData1= 08 01 0A 05 A1 04 03 80 90 A3 18 01 89 6C 0B 21 83 34 37 30 38 35 30 33 33 36 70 09 A1 32 34 38 31 35 30 35 30 7D 02 91 81 |*^*^*

17:26:47.765 | |*^*^*

17:26:47.765 |Out Message -- BriReleaseCompleteMsg -- Protocol= BriProtocol|*^*^*

17:26:47.765 |MMan_Id= 0. (iep=  0 dsl= 8001 sapi=  0 ces=  0 IpAddr=826bb0a IpPort=2427)|*^*^*

17:26:47.765 |IsdnMsgData2= 08 01 8A 5A |*^*^*

17:26:47.765 |MGCPBrid - briSetupSlotReq failed for channel 1|3,100,153,1.63740^10.187.38.8^*

17:26:47.765 |MGCPBhHandler - Sending BhHdr: 0004 0000 0010 8001 0001 0004

|3,100,153,1.63740^10.187.38.8^*

17:26:52.065 |MGCPHandler received msg from: 10.187.38.8

NTFY 659355452 *@BEGWAYZE.MTSINTRA.NETWORK MGCP 0.1

X: 0

O:

One of you can give me some explaination about that line ?

Thanks,

Hervé Jacquemin

Everyone's tags (2)
1 REPLY
Hall of Fame Super Gold

Re: calls disconnect

Take "debug isdn 931" with "term mon" for a failed call on the GW. Do not take other debugs.

Not however thatMGCP for BRI is not a good choice, you would have safe results with H.323 or SIP instead.

279
Views
0
Helpful
1
Replies