Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Calls fail on PRI from PBX to PRI on MGCP Gateway

Local 7-digit dialing fails from Mitel PBX to MGCP controlled gateway PRI. Extensions dialing between the two networks as well as long distance dialing all work fine. On the q.931 debug I get a failure that says " cause i = 0x80A9 - Temporary Failure". Any ideas?

2 REPLIES
Bronze

Re: Calls fail on PRI from PBX to PRI on MGCP Gateway

There are 2 legs.

For the isdn leg, Is the isdn error on a TX or RX?

For the voip leg, what does deb ccapi voip inout tell you?

or deb mgcp packet tell you?

New Member

Re: Calls fail on PRI from PBX to PRI on MGCP Gateway

Did you get this fixed. I am connecting to a Mitel PBX via a Cisco 3845 configured as a H.323 gateway. IP Phones can all Mitel, but when Mitel calls an IP Phone the IP Phone answers but the Mitel phone keeps ringing.

Your help is appreciated.

274
Views
0
Helpful
2
Replies
CreatePlease login to create content