I have two 4 port FXO cards and I have already configured separate IP Phones to make outbound calls through separate FXO ports. But I cannot configure more than one IP Phone to make outbound calls through a partcular FXO port. E.g I want IP Phones with ext. 1023 and 1001 to make outbound calls only through FXO port 3/2 only. I also want only one IP Phone to be able to make calls through several ports. E.g. I want IP Phone with ext. 1016 to be able to make outbound calls throught FXO ports 2/0, 2/1, 2/2, and 2/3 only. Attached is my "sh run" config. pls help
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.