Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can 78xx or 8831 be configured as Third Party SIP device on CUCME 9.1?

Can 78xx or 8831 phones be configured as Third Party SIP devices on CUCME 9.1?  If yes, limitations?

5 REPLIES

You could try it.  I doubt

You could try it.  I doubt anyone has really tested it that much.  Is there a reason you don't want to just install the device pack and add them as the real models?

New Member

I was under the impression I

I was under the impression I needed to be at CME 10.0 for support of the 78xx/8831 phones.  Looking for a short-term option.

I missed the part where you

I missed the part where you said CUCME and was thinking you said CUCM.

 

You can try adding them but you will probably have to manually create the config files.

Silver

I would suggest going with

I would suggest going with CME 10 and fast track option when adding these new phones...tried it - and it works OK. And I think that going to CME 10 from 9.1 is not such difficult for you...

BR,

Dragan

HTH, Dragan
New Member

Jamcgrath,did you ever try to

Jamcgrath,

did you ever try to configure this phone as third party SIP device ?

what was the result ?

I have a similar case here as well.

196
Views
0
Helpful
5
Replies
CreatePlease login to create content