You could set the final destination to another hunt pilot and use the same hunt list in that as the first one. Then on the second you set the final destination to the first HP. In that way you should have a circular reference. Haven't tried it though, but in theory it should work.
Sent from Cisco Technical Support iPhone App
Please remember to rate helpful responses and identify helpful or correct answers.
Just to add another option to the good tips from Java & Roger (+5 guys!)
You can set up a second Line Group that contains the exact same DN's/Members and link this second Group in the Hunt List. If you require a third pass through the group then just repeat the configuration
Switch the rule on the first Line Group to, Try next Member;then try next Group in Hunt List.
This will then cycle through the members a second time (I just tested this out in our lab a little while back)
Let's say the members of the first Line Group Called Sales#1 are 3333,4444,5555 and 6666 then you create a second Line group called Sales#2 that contains 3333,4444,5555 and 6666 and Sales#3 that contains 3333,4444,5555 and 6666.
Include Sales#1,Sales#2 and Sales#3 in the Hunt List; and Switch the rule on the first Line Group to, Try next Member;then try next Group in Hunt List and Switch the rule on the Second Line Group to, Try next Member;then try next Group in Hunt List.
This will then cycle through the Members 3333,4444,5555 and 6666 three complete times.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...