Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can SAA monitor g729r8?

Hi forum,

Can the IOS SAA monitor the delay of two voice peers running g729r8/g729br8?

How do I check which port g729r8 is using?

Kind regards,

Paul

1 REPLY
New Member

Re: Can SAA monitor g729r8?

I do this but failed?

=====================

rtr responder

rtr 1

type jitter dest-ipaddr 172.23.191.9 dest-port 16400 codec g729a =? I am using this to try, but my router is using g729r8.

tag Measuring jitter to PN1 WAN router

rtr schedule 1 life forever start-time now

================

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

System image file is "flash:c2800nm-entservicesk9-mz.123-11.T3.bin"

==================================

it always give me :

Oct 1 09:16:31.388: SAA(1) Scheduler: Updating result

*Oct 1 09:17:16.380: SAA(1) Scheduler: Starting an operation

*Oct 1 09:17:16.380: SAA(1) jitter operation: VRF: lookup table id: 0

*Oct 1 09:17:16.380: rtt hash insert : 172.23.254.1 58117

*Oct 1 09:17:16.380: SAA(1) jitter operation: Starting jitter operation

*Oct 1 09:17:16.380: SAA(1) CtrlMsg: Sending msg, ver=1, id=75, len=52, cmd=4,

ip=172.23.191.9, port=16400, duration=25000ms

*Oct 1 09:17:21.380: SAA(1) CtrlMsg: Timeout

*Oct 1 09:17:21.380: SAA(1) CtrlMsg: Sending msg, ver=1, id=76, len=52, cmd=4,

ip=172.23.191.9, port=16400, duration=25000ms

*Oct 1 09:17:26.384: SAA(1) CtrlMsg: Timeout

*Oct 1 09:17:26.384: SAA(1) CtrlMsg: Sending msg, ver=1, id=77, len=52, cmd=4,

ip=172.23.191.9, port=16400, duration=25000ms

*Oct 1 09:17:31.388: SAA(1) CtrlMsg: Timeout

*Oct 1 09:17:31.388: SAA(1) CtrlMsg: No connection =================? don?t understand why?

*Oct 1 09:17:31.388: rtt hash remove: 172.23.254.1 58117

*Oct 1 09:17:31.388: SAA(1) Scheduler: Updating result

SO1-C2811#

105
Views
0
Helpful
1
Replies
CreatePlease login to create content