Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can somebody provide me SNMP OIDs for monitoring ISDN PRI status?

I want to monitor ISDN PRI status

like show isdn status

How I can do this using Network Monitoring software?

3 REPLIES
Green

Re: Can somebody provide me SNMP OIDs for monitoring ISDN PRI st

1.3.6.1.4.1.9.10.19.1.1.4

cpmActiveDS0s OBJECT TYPE

SYNTAX Gauge32

MAX-ACCESS read-only

STATUS current

DESCRIPTION "The number of DS0s that are currently in use."

::= { cpmDS0Usage 4 }

MIB: CISCO-POP-MGMT-MIB

With this you will get how many are being used at that moment.

- .1.3.6.1.4.1.9.10.19.1.1.9.1.3

cpmDS1ActiveDS0s OBJECT-TYPE

-- FROM CISCO-POP-MGMT-MIB

SYNTAX Gauge

MAX-ACCESS read-only

STATUS Current

DESCRIPTION "The number of DS0s that are currently in use for a particular DS1."

::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9)

ciscoExperiment(10) ciscoPopMgmtMIB(19) ciscoPopMgmtMIBObjects(1) cpmDS0Usage(1)

cpmDS1DS0UsageTable(9) cpmDS1DS0UsageEntry(1) cpmDS1ActiveDS0s(3) 0 }

To actual match the instance the pattern is something like:

1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.5 = controller t1 0/0:5

1.3.6.1.4.1.9.10.19.1.1.9.1.3.1.4 = controller t1 1/0:4

And with this, you will get how many are being used by each one of the sub-interfaces.

- DS0 high water mark

CISCO-POP-MGMT-MIB

1.3.6.1.4.1.9.10.19.1.1.8

The maximum number of DS0s ever used simultaneously.

- CISCO-POP-MGMT-MIB.

cpmDS1DS0UsageEntry will provide the active calls per DS1(T1/E1).

Regarding an application that you can use, I cannot recommend any code or software (other than our Cisco NMS products) since I dont know your requirements. For this info I really recommend you to contact you account manager and ask him for this tool or any snmp walker in the web can help you.

New Member

Re: Can somebody provide me SNMP OIDs for monitoring ISDN PRI st

This OIDs about current activity, but I want to know the status of ISDN PRI..

New Member

Re: Can somebody provide me SNMP OIDs for monitoring ISDN PRI st

Have you tried

"callActiveGroup from the DIAL-CONTROL-MIB"

or

CISCO-POP-MGMT-MIB which has objects like cpmISDNCfgActiveDChannels.

or

CISCO-ISDN-MIB :

demandNbrPhysIf

712
Views
0
Helpful
3
Replies