Can SPA508G SIP phones be provisioned on CME server?
We have a number of SPA508G phones, that we had to purchase when our company was small enough that 'cloud' VoIP was a feasible option to keep cost down. However, we have now crossed the headcount threshold where I need to bring the VoIP server in house.
I would hate to learn that I have to replace ALL these completely functional SPA508G phones, if I were to opt to go with a 2851 ISR running CME 9.x.
Does the most current release of CME support SIP phones, as well as SCCP phones (i.e. IP7942, IP7962, etc.)?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...