cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
410
Views
4
Helpful
3
Replies

Can´t add more than 6 users in a meet me in CUCM 9.

Hi all

I have the following problem when using cisco call manager 9.

We can not add more than 6 users in a meet me.

basically we need to know where could it be the problem.

regards.

1 Accepted Solution

Accepted Solutions

refer to this link and check also max session if you are using HW resources for meet-me

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b2cd07.shtml


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.

View solution in original post

3 Replies 3

yahsiel2004
Level 7
Level 7

Check under the CUCM Service Parameters or if you're using hardware resources, check the DSPFARM Profile.

HTH

Regards,

Yosh

HTH Regards, Yosh

You need to check both, the meet-me service parameter as that defines the overall limit, if you hit the HW CFB limit first, then that one has precedence.

This has been asked plenty of times before, please search CSC for answers before posting.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

refer to this link and check also max session if you are using HW resources for meet-me

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080b2cd07.shtml


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: