Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can't find SNMP OID from CUCM with snmpwalk

I've read a couple of posts from the forum, describing how to poll ISDN-channels with SNMP.

From thouse posts, I've found out that people use the OID:

1.3.6.1.2.1.10.20.1.2.1.1.2

1.3.6.1.4.1.9.10.19.1.1.4

1.3.6.1.4.1.9.10.19.1.1.1.1.7

My problem is that when i do a SNMP-walk and export the found results, i can't find any of thouse OID:s.

Any help? Am I doing the wrong way or missing something?

(The purpose is to monitor ISDN-activity with SNMP from a 2821 running MGCP with CUCM 8.6.2)

2 REPLIES
Green

Can't find SNMP OID from CUCM with snmpwalk

Hi,

May be this link will be of use to you

Getting Channel Usage from a Device

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801abe59.shtml#topic1

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
New Member

Can't find SNMP OID from CUCM with snmpwalk

Thanks for the answer!

The problem thou is that i use snmpwalk for windows and they dont got that kind of syntax.

Here is my output:

C:\>SnmpGet.exe -r:XXX.XXX.XXX.XXX -v:2c -o:1.3.6.1.4.1.9.10.19.1.

1.4

SnmpGet v1.01 - Copyright (C) 2009 SnmpSoft Company

[ More useful network tools on http://www.snmpsoft.com ]

OID=.1.3.6.1.4.1.9.10.19.1.1.4

Type=

Value=

-------------------------------------------------------------------------------

And here is the command-help

Usage:

  SnmpWalk.exe [-q] -r:host [-p:port] [-t:timeout] [-v:version] [-c:community]

        [-ei:engine_id] [-sn:sec_name] [-ap:auth_proto] [-aw:auth_passwd]

        [-pp:priv_proto] [-pw:priv_passwd] [-ce:cont_engine] [-cn:cont_name]

                [-os:start_oid] [-op:stop_oid] [-csv]

   -q               Quiet mode (suppress header; print variable values only).

   -r:host          Name or network address (IPv4/IPv6) of remote host.

   -p:port          SNMP port number on remote host. Default: 161

   -t:timeout       SNMP timeout in seconds (1-600). Default: 5

   -v:version       SNMP version. Supported version: 1, 2c or 3. Default: 1

   -c:community     SNMP community string for SNMP v1/v2c. Default: public

   -ei:engine_id    Engine ID. Format: hexadecimal string. (SNMPv3).

   -sn:sec_name     SNMP security name for SNMPv3.

   -ap:auth_proto   Authentication protocol. Supported: MD5, SHA (SNMPv3).

   -aw:auth_passwd  Authentication password (SNMPv3).

   -pp:priv_proto   Privacy protocol. Supported: DES, IDEA, AES128, AES192,

                    AES256, 3DES (SNMPv3).

   -pw:priv_passwd  Privacy password (SNMPv3).

   -cn:cont_name    Context name. (SNMPv3)

   -ce:cont_engine  Context engine. Format: hexadecimal string. (SNMPv3)

   -os:start_oid    Object ID (OID) of first SNMP variable to walk. Default:.1

   -op:stop_oid     Object ID (OID) of last SNMP variable to walk.

                    Default: walk to the very last variable.

   -csv             Output in CSV (Comma Separated Values) format.

Examples:

  SnmpWalk.exe -r:MainRouter -csv

  SnmpWalk.exe -r:10.0.0.1 -t:10 -c:"admin_rw" -os:.1.3.6.1.2.1.1

  SnmpWalk.exe -r:"::1" -v:3 -sn:SomeName -ap:MD5 -aw:SomeAuthPass -pp:DES

               -pw:SomePrivPass -os:.1.3.6.1.2.1 -op:.1.3.6.1.2.65535 -q

Any sugestions?

(i wanna ensure that i can poll this IOD from a SNMP-program and i first wanna check that it shows a correct info)

1755
Views
0
Helpful
2
Replies