Re: Can't register with sip provider (sipgate.co.uk)
A few days ago I ran into a similar issue, but it was for setting up a SIP trunk in CM 4.2 to an ICX. I discovered that the problem I was having was related to configuring authentication properly and I discovered it after running a packet sniff. In my case, the SIP trunk was passing my Caller ID DN as the username (which the SIP provider had no use for, so it couldn't work.)
A packet sniff will help you find where the hang up is happening.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.