04-01-2014 07:58 AM - edited 03-16-2019 10:19 PM
Hi
I'm having issues with web browseing to cisco IP phones.
Historically we could web browse to a a basic settings/ dianostics page of the phone by simiply browseing to the phones IP address.
However after an upgrade to SCCP firmware 9.4.1.3 this is no longer possible? I have tested from the same lan/subnet but still it refuses connections. Did a telnet using port 80 and this is also refused.
Was this feature removed in the later firmware? I have always found this feature usful especially when doing degugging and remote testing.
If it is still possible to web to them does anyone know how this is enabled. I'm searching around but not found a solution yet.
Thanks
Simon
Solved! Go to Solution.
04-01-2014 01:33 PM
I believe you can use the "service phone webAccess 0" under telephony-service to enable the web access again. -http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_s1ht.html#pgfId-1150654
04-01-2014 01:28 PM
I think web access disabled by default started in 9.3(3) for these phone models:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/6900_series/firmware/933/release_notes/P069_BK_R9A78776_00_rn-9_3_3-6900-series/P069_BK_R9A78776_00_rn-9_3_3-6900-series_chapter_00.html#P690_TP_WC33699B_00
04-01-2014 01:33 PM
I believe you can use the "service phone webAccess 0" under telephony-service to enable the web access again. -http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_s1ht.html#pgfId-1150654
04-02-2014 01:58 PM
Thanks for that all working now. Just need to role it out over a few installs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide