Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot complete Conference-CME 8.6 having PVDM3-64

Hi,

I am using CME 8.6 that is having PVDM3-64. All phones are local to the CME. I am unable to initiate any kind of conference like local, mobile. Below is the config..Kindly suggest:

==============================================================================

voice-card 0

dsp services dspfarm

!

sccp local vlan 70

sccp ccm 10.111.220.31 identifier 1 priority 1 version 7.0+

sccp

!

sccp ccm group 1

bind interface vlan70

associate ccm 1 priority 1

associate profile 1 register CFB24FD678KBNMP

!

dspfarm profile 1 conference 

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

associate application SCCP

!

telephony-service

sdspfarm units 2

sdspfarm tag 1 CFB24FD678KBNMP

conference hardware

max-conferences 6 gain -6

!

ephone-template  1

softkeys hold  Join Newcall Resume Select

softkeys idle  Cfwdall Dnd Gpickup HLog Join Login Newcall Pickup Redial RmLstC

softkeys alerting  Acct Callback Endcall

softkeys connected  Hold Confrn ConfList HLog Join Park RmLstC Select Trnsfer TrnsfVM Acct

softkeys ringing  Answer Dnd HLog

!

ephone-dn  20  dual-line

number 112

keep-conference end-call

name Reception

Label 112

description Reception

Conference ad-hoc/meetme (gives me error)

!

ephone  20

mac-address D4D7.4840.0F88

ephone-template 1

type 7942

button 1:20

========================================================================================

9 REPLIES
Bronze

Cannot complete Conference-CME 8.6 having PVDM3-64

Hi, verify that dspfarm is registered using *show dspfarm profile* and you need to create AD-HOC ephone-dn to make conference work, like these:

ephone-dn 200 dual-line

number A00

conference ad-hoc

no huntstop

!

!

ephone-dn 201 dual-line

number A00

conference ad-hoc

preference 1

no huntstop

!

!

ephone-dn 202 dual-line

number A00

conference ad-hoc

preference 2

no huntstop

!

!

ephone-dn 203 dual-line

number A00

conference ad-hoc

preference 3

no huntstop

!

!

ephone-dn 204 dual-line

number A00

conference ad-hoc

preference 4

huntstop

hth

David

New Member

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

Hi David,

I configured the settings suggested by you….attached for your info..still I am facing the issue…any more suggestion plz..

Rgds,

Partha

Hall of Fame Super Silver

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

It looks like you only created 1 ephone-dn for each conference type, you need at least 4, from the documented I provied:

To configure extension numbers for hardware-based multi-party ad hoc and meet-me ad hoc conferencing, based on the maximum number of conference participants you configure, perform the following steps. Ad hoc conferences require four extensions per conference, regardless of how many extensions are actually used by the conference parties.

HTH,

Chris

New Member

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

I shall try your suggestion tomorrow..thanks..

New Member

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

Hi Chris,

I tried doing this. But same issue while trying to do conference “Cannot complete conference”.

ephone-dn 101 dual-line

number 295

name Conference

no huntstop

!

!

ephone-dn 102 dual-line

number 296

name Conference

preference 1

no huntstop

!

!

ephone-dn 103 dual-line

number 297

name Conference

preference 2

no huntstop

!

!

ephone-dn 104 dual-line

number 298

name Conference

preference 3

no huntstop

!

Rest config for conference remains same…

Rgds,

Partha

Hall of Fame Super Silver

Cannot complete Conference-CME 8.6 having PVDM3-64

Your conference ephone-dns are missing:

"conference ad-hoc"

HTH,

Chris

New Member

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

Hi Chris,

Sorry for sending you the wrong config….Kindly find the config taken from the device:

ephone-dn 101 dual-line

number 295

name Conference

no huntstop

!

!

ephone-dn 102 dual-line

number 296

name Conference

preference 1

no huntstop

!

!

ephone-dn 103 dual-line

number 297

name Conference

preference 2

no huntstop

!

!

ephone-dn 104 dual-line

number 298

name Conference

preference 3

no huntstop

Hall of Fame Super Silver

Cannot complete Conference-CME 8.6 having PVDM3-64

Do you have conference ephone-dn defined?

Check out the "SCCP: Configuring Multi-Party Ad Hoc Conferencing and Meet-Me Numbers" section in the admin guide:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1021179

HTH,

Chris

Re: Cannot complete Conference-CME 8.6 having PVDM3-64

Hi,

On your ephone-dn 20, define a secondary number (number xxx secondary xxxx). Then you conference should work.

What Chris also said will work.

Regard,

Baqari

Sent from Cisco Technical Support iPhone App

1106
Views
7
Helpful
9
Replies
CreatePlease login to create content