Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot get video to work on 9971

We just got in a couple of 9971's with the camera's.  I'm trying to get them to work no to avail.  We are running CUCM 7.1.3.32900-4, which I believe supports the 9971's as I was able to configure and register the phones.  The load on the phone is sip9971.9.0.3

When I was doing some research on getting the camera to work, I see that I should have the Cisco Camera* option under the Product Specific Configuration Layout.  Well I don't have that at all.  If I go into the System > Enterprise Phone Configuration, I do see it in there and do have it enabled.  When I change that setting from Disabled to Enabled, do I have to restart any services? Because I haven't.

Any information/suggestions you can provide are greatly appreciated.

Thanks

Joe

CUCM9971.JPG

Everyone's tags (2)
1 REPLY
Cisco Employee

Re: Cannot get video to work on 9971

Probably hitting this:

CSCtf17163            Bug Details

Add videoCapabilities & ciscoCamera for 9971 and 9951  Phones

Symptom:
Cannot enable video capability or ciscocamera  for 9971 and 9951 phones

Conditions:
Config item  missing from phone config page

Workaround:
Install a  device pack that has these changes.

Fixed-In http://tools.cisco.com/Support/BugToolKit/images/Field%20Definitions.html
7.1(4.98000.159)
7.1(4.99061.2)
7.1(4.98000.164)
7.1(4.98000.169)
7.1(3.33024.1)
7.1(5.10000.12)                                                          

Try installing the latest devpack for your version


HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
776
Views
0
Helpful
1
Replies