Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cant ping phone

Hi Cisco tech's,

Have very much enjoyed reading lots of cisco material recently. Thanks to all previous suggestions

CME 3.3

IOS is 2691 ipvoice. version 12.4

Can ping router 192.168.0.12 and default gateway of 192.168.0.1

Phone has ip of 192.168.3.1 as shows under network config.  subnet etc

Correct hostname, mac address etc

But cant ping.

Shows in CME with correct mac, number and phone load

Attached is output of 2 commands I ran.

Please advise further

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Cant ping phone

Hello John,

how the phone are connected through ?  what is your topology?

Phone-A----SWITCH-----CME?

what is the phone model?


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
2 REPLIES
Cisco Employee

Cant ping phone

Hello John,

how the phone are connected through ?  what is your topology?

Phone-A----SWITCH-----CME?

what is the phone model?


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
New Member

Cant ping phone

Thanks Nadeem.

Phone model is 7912. Using SCCP.

Hav 2924 switch interconnected to 2961 Multi Platform Router. CME as mentioned before

DHCP coming from 192.168.0.104. Same location that cisco router received its IP address

141
Views
0
Helpful
2
Replies