Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
ezy
New Member

Cant place call for IP Phone from Outside

Hi, I have a Call Manager 6.0.1 and configured at the beginning 3 IP phones. They are registered and have the real phone numbers. Calls to outside und within the network are fine, but calls from outside are rejected (number unknown). I see on the gateway that the numbers will transfered to the Call Manager but call is not established.

Thanks in advance.

Erich

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cant place call for IP Phone from Outside

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

2 REPLIES
New Member

Re: Cant place call for IP Phone from Outside

Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".

ezy
New Member

Re: Cant place call for IP Phone from Outside

Hi, thanks for advice and help, the problem was a translation pattern wich was misconfigured from a CME configuration before.

Thanks again

Erich

618
Views
0
Helpful
2
Replies
CreatePlease to create content