06-23-2008 09:05 AM - edited 03-15-2019 11:27 AM
Hi, I have a Call Manager 6.0.1 and configured at the beginning 3 IP phones. They are registered and have the real phone numbers. Calls to outside und within the network are fine, but calls from outside are rejected (number unknown). I see on the gateway that the numbers will transfered to the Call Manager but call is not established.
Thanks in advance.
Erich
Solved! Go to Solution.
06-23-2008 09:42 AM
Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".
06-23-2008 09:42 AM
Do you know how many digits your PSTN is sending you? I'd use a debug command to watch call setup. If the gateway is h.323, try "debug cch323 h225" and "debug cch323 h245".
06-23-2008 10:30 AM
Hi, thanks for advice and help, the problem was a translation pattern wich was misconfigured from a CME configuration before.
Thanks again
Erich
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide