Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

CAR and CUCM 7.x: maximum and medium calls on a VG

Hello,

we have a CUCM 7.x and a VG (in H.323); the VG has some E1s.

Is it possible to get the maximum and medium calls on the VG by CAR, in a specific time range (for example, 2 months, or 1 week)?

Moreover, is it possible to get those statistics for every single E1 present on the VG?

TIA and regards.

2 REPLIES
Cisco Employee

Re: CAR and CUCM 7.x: maximum and medium calls on a VG

These are the only reports CAR has on GWs, not sure if they will fit your needs:

Configuring Gateway Device Reports

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_1_2/car/cardvgat.html

EDIT: Forgot to mention, since CUCM is unaware of which T1 you used as it only know the H323 GW as a whole, it will report on the H323 GW without further details of which T1 was used.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CAR and CUCM 7.x: maximum and medium calls on a VG

Dear javalenc,

thanks for your answer.

I hoped it was possible by CAR to get the single E1 utilization, but I understand the limitation of H.323 in this situation.

What about MRTG, instead? Do you know a configuration example for this tool?

Regards.

242
Views
4
Helpful
2
Replies
CreatePlease to create content