Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Card issue

Hi all, can anyone please tell me if i can use the ISDN card WIC-1B-S/T-V3 to carry voice cause it seems like the datasheet is missed

thanks

3 REPLIES
Hall of Fame Super Gold

Re: Card issue

Cannot be used for voice.

You can only use cards that have VIC designation (Voice), WIC designation means data (Wan). Some cards can do bot, so are designed VWIC.

Hope this helps, please rate post if it does!

New Member

Re: Card issue

Damn i know it :( and and i'm going to choose this one VIC2-2BRI-NT/TE Am i right?

Hall of Fame Super Gold

Re: Card issue

Yes. If you need to do both data and voice with BRI you can get both cards and place them in the same router and connect to the same NT.

Only, telco will have to provision the circuit as multipoint (no static tei). This way both cards will be be able to use it, even simultaneously.

As an appreciation to those providing useful answers, please rate post with the scrollbox below!

101
Views
0
Helpful
3
Replies