07-28-2010 11:32 AM - edited 03-15-2019 11:58 PM
I am using Telephony-Service "SRST Mode Auto Provision None". (not call-manager-fallback). CME version 7.0 with 7965 telephones. Router is running c2801-ipvoice_ivs-mz.124-20.T4.bin". Cbarge option only available if ephone is preconfigured with no privacy command.
Seems to be a problem with the ephone not picking up the "no privacy" from the ephone-template configured under telephony-service. Phones register fine but when shared line is in "remote in use" state and you press the button you get a dial-tone. No option for cbarge. I have also configured "no privacy under telephony service with no luck. I can get it to work by preconfiguring ephone with "no privacy" however was curious if this is a known bug or if there is any documentation addressing the issue. Thank you.
08-03-2010 09:55 AM
Are you sure that the DN learned was a dual line or an Octo Line ? I am pretty sure Cbarge works fine
in auto all with DN learned is octo will need to check in auto none to see if it works but first thing you n
eed to check the above ? Also is auto none a requirement in your case ?
08-03-2010 10:03 AM
Yup you may be right doesnt work in auto none. There is a DDTS on this CSCtu11843 so you have to do auto all and make it work.
Thanks
08-03-2010 10:20 AM
Thank you for your reply. Can you confirm the Bug number I am unable to locate on Bugtoolkit with CSCtu11843.
08-03-2010 10:23 AM
08-03-2010 10:32 AM
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide