Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ccapi inout debug cause= 65


I have an urgent situation here

kindly i need your help

I have a CME integrated with an internal CUE

When i Dial the AA number it gives me unknow number

I debuged the call

debug voice ccapi inout

it gives error cause= 65

in the following link

it says

Typical scenarios include:

No codec match occurred.

H.323 or H.245 problem leading to failure in media negotiation


THanks in advance

  • IP Telephony

ccapi inout debug cause= 65

do you see the CME negotiating G711 with CUE? If G711 is not configured for the phones, have you configured Transcoders?

could you please post the complete configuration and the debug for a test call?

//Suresh Please rate all the useful posts.
New Member

Re: ccapi inout debug cause= 65


Kindly find the attachment

ccapi inout debug cause= 65

CUE supports only u-law. so please change the dial-peer 788 to force G711ulaw


dial-peer voice 788 voip

destination-pattern 7..

session protocol sipv2

session target ipv4:

dtmf-relay rtp-nte digit-drop

codec g711alaw <<< remove this>>

codec g711ulaw << add this>>

no vad


Please try this and let me know how it works.

//Suresh Please rate all the useful posts.