Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CCM 4.2(3) issue with #

Hi all:

About a month ago I upgraded our CallManagers to 4.2(3) with the latest SR at the time.

The way our system is setup is that it sends all outgoing calls to an Avaya PBX, and that requires a #9 to get an outside line. After the upgrade, this has changed and I finally figured out that in order to get an outside line now the user must dial #9, the number, and then a trailing # sign. I've tried to fix this by having the CallManager remove the trailing #, but it does not appear to work.

Any ideas?

Thanks in advance!

1 REPLY
New Member

Re: CCM 4.2(3) issue with #

No ideas anyone?

I've told users to just put the trailing # in when dialing for now, but that is a bit of an annoyance...

85
Views
0
Helpful
1
Replies