I have a DP with about 100 phones in it. I want to change the common profile that the phones use. I cannot find a way to do this through BAT, is this possible? I can only see the option to change common profile through the template used to originally import the phones. thanks
when you use BAT. All the phones subscribing to a service using BAT use common service parameters. You
can't input different service parameter for each phones/users. BAT phone update interface takes input for service name, service parameters and the phones which you want to subscribe this service on. With this input, BAT subscribes all selected phones to the service with common parameters (entered on BAT update phones page).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...