CCM 5.0.4 problems with FXS/FXO MGCP gateways registration
We have just installed Cisco Call Manager 18.104.22.1680-1
with device pack cmterm-devicepack22.214.171.1247-1.cop.sgn and have now next problems:
1. We use Cisco 3825 with IOS c3825-advipservicesk9-mz.124-11.T1.bin as gateway with BRI,FXS and FXO ports. BRI ports seems to be OK, but FXS ports 1-2 times per day become UNREGISTERED.. FXO ports are always REJECTED . We use VIC2-2FXO card in Module Slot0 , Subunit 0 , Module in Slot2 is EVM-HD with Subunit 0 = EVM-HD-8FXS/DID and Subunit 1=EM-4BRI-NT/TE and Subunit 2 = EM-4BRI-NT/TE. The same symptoms are with 2821 gateway with the same interface cards.
Also we have old Call Manager 4.1.3 and when we registering those gateways to it, everything is OK with FXO ports, but with FXS is the same - 1-2 times per day become UNREGISTERED
2. Second problem is with IP phones 7912. When they get registered to CCM, we can make outgoing calls from them, but if we try to call them from others phones, disconnect signal is provided immediately (call cannot be completed)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...