hi i am new to voice and i have a medium lab in my home.....i have CCM 4.2........now i have noticed that CCM 5.0 is available and i want to get practice on this new CCM.....now can someone plz tell me from where i can get CCM 5.0 or 5.1 for home lab....and do i have to get licence for that as well if i m using in my home lab....plus is it linux based only....thanks a million guys...i will be waiting desperatly for the answer....cheers
Just like previous versions of callmanager, you cannot download an iso image of the discs. You can check with your local Cisco account team for a copy of the callmanager disc set. Still you will need licenses for the nodes (Publisher, subscriber etc) and licenses for the phones. The servers require that they have a min. of 72 gig hard drives.
To add a note to Sankars good info. CCM 5.0 and CCM 5.1 are Linux only (CCM 6.X will have both Linux and Windows support / expected sometime in 2007). The other thing you probably want to know is that there is no upgrade path from CCM 4.2 to CCM 5.X
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...