Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ccm 5.0 and linksys phone

hi!

how do i connect linksys phone(spa941)

with ccm 5.0 ?

i connected x-lite with ccm 5.0.

it is very good.

but, i do not connecet linksy phone.

help me, thanks.

2 REPLIES
Bronze

Re: ccm 5.0 and linksys phone

When third-party SIP phones get configured, the Cisco Unified CallManager database gets updated when the administrator uses Cisco Unified CallManager Administration.

Need to enable Digest Authentication for Third-Party SIP Phones

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/sys_ad/5_0_4/ccmcfg/b09sip3p.htm

New Member

Re: ccm 5.0 and linksys phone

I would also like to use Linksys phone for our remote users. We will have CCME5 setup, and have cisco phones in the office. My goal is to have the remote users use Linksys phones, because they connect via SIP. Is it possible for them to connect to the CCME without any other special routing on the remote end?

104
Views
0
Helpful
2
Replies