CCM 5.1 Route List details for Calling Party Number
In CallManager 4.1 I would put our main number under Route List > Details. This forced called party number to our main number. I don't see this same setup in CallManager 5.1? I don't want to do it in Route Patterns as there are many. Can I not do it at Route Group/Route List level?
Re: CCM 5.1 Route List details for Calling Party Number
Even though you do this at route list level, its actually done at the individual route groups with in each route list. So you open route lists first, then go to route groups that are members and modify the Calling party transform mask.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...