The part numbers you listed in your first post refers to old CCM 3.x, 4.x licensing where each server provides a license that is recommends the number of devices that may be homed on that server. 7825s could do up to 1000 devices, while 7835s could do 2500.
With CCM 5.x, the type of server platform does not matter any more. For each node in the cluster, Publisher, Subscriber1, Subscriber2.... you need to buy a node license. Also each phone is represented by Device License Units (DLUs). A 796X phone is equivalent to 4 DLUs. So if you want 100 796X phones to be added in the system, you need 400 DLUs.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...