I have a CCM and cue integration. This works fine, When I try and run it in SRST mode I can still use voicemail, but MWI is not working. I understand that MWI will not work as my callmanager is down, but how do I configure for MWI when it is in standby mode? I have tried the MWI sip command in fallback mode but that makes no difference.
Sorry to add a problem onto another problem...I am trying to make CUE integrate with CCM 6.0 but it does not seem to be working. Is it possible to send me the procedure to configure CCM 6.0 as well as CUE please. Any step by step document will be much appreciated.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...