just as a side note to the info Rob already provided it's a flavor of Linux Red Hat Enterprise Edition and the user interface is locked down to only some basic functions for security reasons. That's why you ssh into it.
if you get your hands on the root pwd you will get the real linux interface with no limitations, but since not many users are familiar with linux they can break the system if they change things in there. that is why it's locked down on the user interace
Thank you sir !!! I appreciate the inputs. I am currently running CCM 4.1.3 sr6a and I know eventually will have to upgrade to a Linux based CallManager and I have no experience with Linux. Looked like I am gonna have to start learning Linux soon.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...