Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CCM 9.1 dial plan with 11 digits Pros and Con

all I came into a new setup where they have the following:

DN:  11 digits (1XXXXXXXXXX) which matches the DID's

all LDAP users has +1 dialing in telephone field

I guest this was mainly used for + dialing

used across 5 locations

***

Now they want to add site codes (CCC+last4) 7 digits for internal dialing

                              -- plan on adding 20 more sites.

this would not be so bad if the site had DID's in a con't range.  I am hoping this does not turn into a nightmare

plan:

leave the DN at 11 digits

change the display to show CCC+last4

create translation for the site code (CCC)

                               CCC.XXXX  --  predot, prefix 1678507  =   16785075555

                                 

has anyone done this type of dial plan before?  Pros and Con

2 REPLIES
Cisco Employee

Hello!Please, explain a

Hello!

Please, explain a little bit more "this would not be so bad if the site had DID's in a con't range"..

Can u put some examples may be?

 

Regards,

Kirill

Hall of Fame Super Silver

You got it, you need separate

You got it, you need separate TPs to cover each DID range assuming different area code or exchange, obviously if only the last 4 digits are different you can summarize it even if they are not consecutive as site id is unique and you only prefix area code + exchange.

Chris

52
Views
0
Helpful
2
Replies