Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ccm management port

Hi .

       This is Pankaj . Could some body tell me how to give the ip address of CUCM server management interface. And can we open GUI access page from that port as we can do from its heather net port.

pankaj sharma

Ccm management port

Hi Pankaj,

Unfortunately Cisco do not support managing CUCM server through Management port present in Server ( I believe you are talking about iLO port in MCS box).

Cisco supports the following standard features of iLO and iLO2:

Virtual power to allow full remote control of the server power button

Remote text console to enable the display and control of remote host server activities such as shutdown and startup

Cisco Supports the following advanced features of iLO and iLO2:

Remote  console and integrated remote console to access the system KVM and  control virtual power and media from a single console (with Microsoft  Internet Explorer)

Virtual  media applet to connect a floppy drive, CD/DVD-ROM, or USB key physical  devices or images on your client PC to the remote server so they appear  local to the server during system boot or while the operating system is  available. You may also connect virtual media from within integrated  remote console.


Ronak Patel

Rate helpful posts by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.