Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ccm-manager Configuration Auto-Download failed

I recently add a remote site. The Gateway is running IOS 12.4.15-T8 and the Callmanager is V5.12. Everthing seems to be working however I notice the Vocie Gateway indicate the Configuration Auto-Download Fail. See below.

Configuration Auto-Download Information

=======================================

No configurations downloaded

Current state: Downloading XML file

Configuration Download statistics:

Download Attempted : 5

Download Successful : 0

Download Failed : 0

TFTP Download Failed : 8857

Configuration Attempted : 0

Configuration Successful : 0

Configuration Failed(Parsing): 0

Configuration Failed(config) : 0

I have attached a ccm debug and ccm config.

Any help is appreciated.

Mark

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ccm-manager Configuration Auto-Download failed

You may want to try a 'no ccm mgcp' 'ccm mgcp'.

-nick

5 REPLIES
New Member

Re: ccm-manager Configuration Auto-Download failed

Hi All,

Anyone has any suggestions?

Thanks.

Mark

Re: ccm-manager Configuration Auto-Download failed

Hi Mark,

I would do a quick test:

Try downloading this file:

tftp://10.108.15.9/CATOR3RT2851-1.cnf.xml

You can use the tftp client that should be built into windows (maybe not Vista), a 3rd party tftp client, or just the router cli.

If you can download it, it may be a ccm manager config error, or a way the CUCM is writing the file.

If you can't download it, I would try restarting the TFTP service on CUCM.

-nick

New Member

Re: ccm-manager Configuration Auto-Download failed

Hi Nick,

I am able to download the file using tftp client or from a PC's commnd prompt. But I can't run the tftp command from touter's cli, % Unrecognized command. Any suggestions?

Thanks

Mark

Re: ccm-manager Configuration Auto-Download failed

You may want to try a 'no ccm mgcp' 'ccm mgcp'.

-nick

New Member

Re: ccm-manager Configuration Auto-Download failed

Thanks Nick. The no ccm mgcp and ccm mgcp has resolved the problem.

Thanks again

2125
Views
0
Helpful
5
Replies