Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCM to CME connection...last question

If i configure the router running CME as an H323 gateway on the CCM will i also need to put the H323 commands on the router itself even though we are not using a gatekeeper?

i.e. h323-gateway voip interface

h323-gateway voip id

h323-gateway voip h323-id....

thanks for the help....

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: CCM to CME connection...last question

No, you dont have to do this. You can configure the dial-peer to point to CM and on the CM add the Router as an H.323 Gateway, this should take care of things. Only thing that you can do is to do a h323 bind to aviod one way audio issues. Check the following link for information about the same:

http://www.cisco.com/en/US/customer/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml#h323

1 REPLY
Gold

Re: CCM to CME connection...last question

No, you dont have to do this. You can configure the dial-peer to point to CM and on the CM add the Router as an H.323 Gateway, this should take care of things. Only thing that you can do is to do a h323 bind to aviod one way audio issues. Check the following link for information about the same:

http://www.cisco.com/en/US/customer/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml#h323

127
Views
5
Helpful
1
Replies
CreatePlease to create content