Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CCM with CME

Hi,

i have CME configured as a gateway in CCM.

when i am calling into CME from an IP phone registered the CCM, the name will display on connect not while rining.

any idea!!!

Good day

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: CCM with CME

Not sure with h323. Using sip, the calling name should be there in any case.

Anyway is good to configure the incoming DP, so you can configure additional things, like codec, translations, cor, etc.

6 REPLIES
Hall of Fame Super Gold

Re: CCM with CME

Are you using h.323 or sip? Try the latter that is easy to understand and debug.

New Member

Re: CCM with CME

I already did this and it is H323.

the IOS version is 124-15.T3.

Good day

Hall of Fame Super Gold

Re: CCM with CME

Check that the name is in there at time of the call, debug ccsip or cch323.

New Member

Re: CCM with CME

Hi,

please note that i used "debug cch323 all".

attached the debug where you can see a working scenario.

I replayed it in the LAB.

i am calling from CCM 7002 to CME 1002:BR2, by default no caller name appears on the 7002, BR2 (Sending NOTIFY Display Info IE = BR2-ph2) works only if i have a dial-peer on the CME pointing to 7002.

It is a bit funny to work this way but in my case (at customer site) i have kind of translation pattern, i donno if this will work.

any way i will try it next week, but appreciate if someone can explain why this is happening.

Good day

New Member

Re: CCM with CME

sorry i forgot the attachement.

Hall of Fame Super Gold

Re: CCM with CME

Not sure with h323. Using sip, the calling name should be there in any case.

Anyway is good to configure the incoming DP, so you can configure additional things, like codec, translations, cor, etc.

170
Views
10
Helpful
6
Replies