Like Gonz suggested, to access any files other than those available via tftp service, you will have to use root username and pwd, which AFAIK only TAC can help provide access to the system. THis is too dangerous to play with for an end user if you dont know what you are doing.
OK, but what about the guys who really know what are they doing? In my opinion, Cisco severely reduced the possibility to check the dhcp server functionality. The gui offers nothing. Just a quick comparison between standard dhcp servers (windows, linux, doesn't matter) and ccm reveals that once you have configured ccm dhcp server you can forget about it. You can't monitor its behaviour properly.
I think this is a major flaw. As an administrator, I want to be able to see and control every aspect of the system I'm in charge of.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...