my customer is running CCM 5.1b cluster of two MCS-7825i2 servers for around 100 IPT users. I've encountered a strange problem this week; any updates on any IP phone through CCMAdmin (CSS, adding service to phone, change device pool, change MRGL on phone,..etc) is being made and saved correctly, but the IP phone being updated through CCM does not get any update, even when initiating reset through CCM to any IP phone, it will not reset or change its state, like you did no thing!
what is happening is that each ip phone is like holding its old conf file and does not get any update once made through CCM web admin!
i started troubleshooting this by resetting tftp (on Publisher), then cisco callmanager service on both Pub and Sub with no avail!
i checked connectivity and security settings in the data network, everything was ok.
lastly, what i had to do was to restart the CCM Publisher server, the result was every thing worked fine after this restart?
so some service/s was/were stuck.
what is your opinion, is it the 5.1b version issue? or something else?
i was confused to have like such a case, it is CCM 5.1.x and linux based OS?!
Sounds like a replication and SDL Link issue. Therefore rebooting the Publisher cleared it. It would be tough to say what would have caused it. Could be something to do with the services or even a Network issue which triggered the problem.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...