Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCME 4.0 and CCME 5.0

I'm going to purchase a new router 3825 with CCME and it comes with CCME 4.0

Which are the differences with CCME 5.0?

Is it better? When is it necessary ?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CCME 4.0 and CCME 5.0

Hi Santi,

The latest CME release is 4.1 just out (see Tony's good post). The latest release on the 4.0 train is 4.0.3 (probably a great place to start unless you need the 4.1 new funtionality) Have a look;

Here is the CME documentation roadmap;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_documentation_roadmap09186a0080189132.html

And also this good reference from TONY@Cisco in this most recent "Ask the Expert" event

"Yes, CME 4.1 will be supported for "EARLY ADOPTERS" in 12.4(11)XJ - I should have caveated my previous statement to mention the IOS in case people wanted to try out the software earlier :)"

From this excellent thread (a super read!);

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Expert%20Archive&topic=Voice%20and%20Video&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddd265e/12#selected_message

Here the info on release CME 4.0.3

Cisco Unified CME 4.0(3) New Features

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_feature_guide09186a008070cfef.html

Cisco Unified CallManager Express 4.1

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00807aae21.html

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Gold

Re: CCME 4.0 and CCME 5.0

Santiago,

you probably mean CCM 5.0 / 5.1...

We already discussed the differences in a previous thread...

Hall of Fame Super Red

Re: CCME 4.0 and CCME 5.0

Hi Santi,

The latest CME release is 4.1 just out (see Tony's good post). The latest release on the 4.0 train is 4.0.3 (probably a great place to start unless you need the 4.1 new funtionality) Have a look;

Here is the CME documentation roadmap;

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_documentation_roadmap09186a0080189132.html

And also this good reference from TONY@Cisco in this most recent "Ask the Expert" event

"Yes, CME 4.1 will be supported for "EARLY ADOPTERS" in 12.4(11)XJ - I should have caveated my previous statement to mention the IOS in case people wanted to try out the software earlier :)"

From this excellent thread (a super read!);

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Expert%20Archive&topic=Voice%20and%20Video&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddd265e/12#selected_message

Here the info on release CME 4.0.3

Cisco Unified CME 4.0(3) New Features

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_feature_guide09186a008070cfef.html

Cisco Unified CallManager Express 4.1

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00807aae21.html

Hope this helps!

Rob

125
Views
0
Helpful
2
Replies
CreatePlease to create content