Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

CCME 4.0 issue and 7931 handsets

I have a site with 6 PSTN lines connected to FXO ports I can dial into each port ok but when the site attempts to make more then 2 calls out (from any handset) they get a fast busy tone.

There is no CoR etc tried to keep it basic.

Each phone has an individual extension and the reception phone has 2 line buttons for all the FXO ports to terminate on.

Config as below:

voice-port 0/0/0 to 0/0/1 and 0/2/0 to 0/2/3

trunk-group FXO-Group

supervisory disconnect dualtone mid-call

no vad

cptone AU

timeouts call-disconnect 2

timeouts wait-release 2

connection plar opx 99

impedance complex1

!

!

ephone-dn 20 dual-line

number 99

label Line

call-forward noan 19 timeout 30

no huntstop

!

!

ephone-dn 21 dual-line

number 99

label Line

preference 1

call-forward noan 19 timeout 30

no huntstop

!

!

ephone 6

device-security-mode none

mac-address 0023.5EB6.E97E

ephone-template 1

username "16" password 16

speed-dial 15 50

speed-dial 17 9120

speed-dial 18 9121

speed-dial 19 9122

paging-dn 25

type 7931

button 1:6 2:21 3:20 6m1

button 7m2 8m3 9m4 10m5

button 11m7 12m8 17m38 18m39

button 19m40

!

dial-peer voice 1 pots

trunkgroup FXO-Group

incoming called-number .

!

dial-peer voice 10 pots

trunkgroup FXO-Group

description ** Outgoing Call to PSTN **

preference 5

destination-pattern 0T

Any feed back would be great. thanks

2 REPLIES
Hall of Fame Super Gold

Re: CCME 4.0 issue and 7931 handsets

Which exact IOS ?

Bronze

Re: CCME 4.0 issue and 7931 handsets

Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T1,

131
Views
0
Helpful
2
Replies