Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CCME 7.0 Dial Peers

Hello,

I am trying to get a CCME 7.0 install going with outbound calls on a PRI. This is in an area with 10 digit dialing for local calls. RIght now I have this dial peer to handle all calls:

dial-peer voice 3 pots

description PRI Outbound_Local

translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE

destination-pattern 8.T

port 0/0/0:23

It is working for both local and LD but it has to timeout first. How can I get calls to flow out immediatly for both 10 digit local and 11 digit long calls?

Thanks in advance! All replies rated

6 REPLIES
Hall of Fame Super Gold

Re: CCME 7.0 Dial Peers

With proper configuration.

destination-pattern 81[2-9][0-8].[2-9]......

forward-digits 11

And the local DP, assume there is only one area code

destination-pattern 8555[2-9]......

forward-digits 10

Re: CCME 7.0 Dial Peers

Hello,

Your "T" in your destination pattern instructs the dial peer to wait for the 15 second interdigit timeout before forwarding the digits to the PSTN. To get the call to complete quicker, you may want to use a more explicit destination pattern.

Example

dial-peer voice 3 pots

descrip PRI Outbound_Local

translation-profile outgoing CALLER_ID_TRANSLATION_PROFILE

destination-pattern 8[2-9].........

port 0/0/0:23

forward-digits 10

For LD calls the destination pattern would be

destination-pattern 81[2-9].........

and

forward-digits 11

Hope that helped, if so please rate.

New Member

Re: CCME 7.0 Dial Peers

You can do a "debug isdn q931", "term mon" to see how the called and calling number get presented to the gateway.

Hall of Fame Super Gold

Re: CCME 7.0 Dial Peers

No debug needed, the answers above perfectly address the question.

The only thing missing is posts rating.

Re: CCME 7.0 Dial Peers

LOL...right on Paolo!!!

New Member

Re: CCME 7.0 Dial Peers

Sorry for the delay guys. Thanks!!!!

120
Views
10
Helpful
6
Replies