This sounds interesting. Let mepaint the exact senario.
When doing dynamic configuration for the cme 3945 router (which comes bundled with a default 25 user license), I included an additional 100 cme licenses (FL-CME-SRST-100) which makes it 125 users in all.
After a while, I decided to maximise the capabability of the router by requesting for more FL-MCE-SRST-100= (two qty) to accommodate the extra 200 IP Phones I have.
Now, If there is no need toload any license, My questions are:
1) would I be able to configure the additional 200 IP Phones without requesting for the additional FL-CME-SRST-100= licenses?
2) the FL-CME-SRST-100= is a priced item so what is the justification for pricing it.
3) Are you confirming to me that I can also get a default cme bundled router with the default 25 user licenses, and with this I can be able to configure 350 IP Phones on it without getting more licenses?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...