Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ccme call forward and tranfer doesn't work with 0

Hi,

I'm installing a ccme 8.6 on cisco isr 2921 voice bundle, when I make outgoing call through an E1 CARD I need to compose 0 before the PSTN number, for that no problem, but when I want to transfer or forward the calls to a pstn number that doesn't work, I'm able to forward and transfer the calls without the 0, why ?

A part of my configuration is in the following :

telephony-service

protocol mode ipv4

sdspfarm units 10

sdspfarm transcode sessions 30

no auto-reg-ephone

authentication credential admin exprimm

em keep-history

xml user admin password exprimm 15

max-ephones 100

max-dn 100 no-reg primary

ip source-address 172.16.120.125 port 2000

service phone WebAccess 0

--More--          service phone webaccess 0

service phone webAccess 0

timeouts interdigit 2

system message FitchRatings

url directories

http://172.16.120.125/localdirectory

url services

http://172.16.120.124/voiceview/common/login.do

url authentication

http://172.16.120.125/CCMCIP/authenticate.asp

 

cnf-file location flash:

cnf-file perphone

user-locale FR load CME-locale-fr_FR-French-8.6.2.4.tar

network-locale FR

load 7937 P00503010800.bin

load 7942 SCCP42.9-1-1SR1S.loads

load 7962 SCCP42.9-1-1SR1S.loads

time-zone 23

time-format 24

date-format dd-mm-yy

voicemail 8888

max-conferences 16 gain -6

call-park system application

call-forward pattern 0.T

moh music-on-hold.au

multicast moh 239.23.4.10 port 2000

web admin system name admin secret 5 $1$H8yz$PsBfKfAJ1TOvZ5OAMkDtV.

--More--          dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern 13

transfer-pattern 0.T

telephony-service

protocol mode ipv4

sdspfarm units 10

sdspfarm transcode sessions 30

no auto-reg-ephone

authentication credential admin exprimm

em keep-history

xml user admin password exprimm 15

max-ephones 100

max-dn 100 no-reg primary

ip source-address 172.16.120.125 port 2000

service phone WebAccess 0

--More--          service phone webaccess 0

service phone webAccess 0

timeouts interdigit 2

system message FitchRatings

url directories http://172.16.120.125/localdirectory

url services

http://172.16.120.124/voiceview/common/login.do

url authentication

http://172.16.120.125/CCMCIP/authenticate.asp 

cnf-file location flash:

cnf-file perphone

user-locale FR load CME-locale-fr_FR-French-8.6.2.4.tar

network-locale FR

load 7937 P00503010800.bin

load 7942 SCCP42.9-1-1SR1S.loads

load 7962 SCCP42.9-1-1SR1S.loads

time-zone 23

time-format 24

date-format dd-mm-yy

voicemail 8888

max-conferences 16 gain -6

call-park system application

call-forward pattern 0.T

moh music-on-hold.au

multicast moh 239.23.4.10 port 2000

web admin system name admin secret 5 $1$H8yz$PsBfKfAJ1TOvZ5OAMkDtV.

--More--          dn-webedit

time-webedit

transfer-system full-consult

transfer-pattern 13

transfer-pattern 0.T

Best regards,

Ludovic GUYOMARD

1 REPLY
Green

ccme call forward and tranfer doesn't work with 0

Ludovic,

Can you try adding this to the config

!

telephony-service

transfer-pattern .T

!!

HTH

Alex

Please rate useful posts

Regards, Alex. Please rate useful posts.
366
Views
0
Helpful
1
Replies